Piano Forum

Topic: Runner Action  (Read 1608 times)

Offline marao

  • PS Silver Member
  • Jr. Member
  • ***
  • Posts: 27
Runner Action
on: January 04, 2010, 04:15:55 PM
I have one old piano and i think replace the action, what sould i do?
How much the Runner action cost? where could buy it? Can i replace the old action for any other brand - Runner - without problem?

thank you for help me, and happy new year!

Offline richard black

  • PS Silver Member
  • Sr. Member
  • ***
  • Posts: 2104
Re: Runner Action
Reply #1 on: January 04, 2010, 10:01:52 PM
It's a Renner, not Runner, action.

Whether you can replace the action as a simple drop-in job depends on the piano. Which part of the world are you in? If there are piano technicians in your part, ask the advice of one (or more) of them. You might get a more detailed answer here if you give more detail (like brand and model of piano), but basically it seems from the way you ask the question that you don't know much, so your best bet is to pay someone who does!
Instrumentalists are all wannabe singers. Discuss.

Offline keys60

  • Sr. Member
  • ****
  • Posts: 468
Re: Runner Action
Reply #2 on: February 19, 2010, 05:21:40 PM
If you're going to rebuild an entired action with Renner parts, its going to cost you a few grand. Make sure it is economically feasible.
If you rebuild an ordinary run of the mill piano that doesn't carry a good resale, you will still have an ordinary run of the mill piano with some expensive parts in it.
Check with a registered piano tech, and even then, don't get sold a bill of goods.

Offline silverwoodpianos

  • Sr. Member
  • ****
  • Posts: 413
Re: Runner Action
Reply #3 on: February 22, 2010, 04:56:00 PM
Hello Marao,

 I am a technician for 38 years doing restorative and rebuilding work. I can tell you that while an action can have the moving parts replaced, you would not fit a Renner action into your old piano.

As Keys60 has stated previously, Renner parts are not cheap, fitting them would be expensive, (even if you managed to get them to fit at all.)

And still you would have the same piano with the same age of all the remaining parts, string, tuning pins, sounding board, and bridges, etc.etc.

Depending upon what make this instrument is, probably the most financially efficient route would be to have the existing action reconditioned, or consider a newer instrument.
As I am un-able to view what you have there it would be best to discuss this with a technician of your choice locally; preferably someone who does restorative work of this type.

Best wishes,
Dan Silverwood


Dan Silverwood
 www.silverwoodpianos.com
https://silverwoodpianos.blogspot.com/

If you think it's is expensive to hire a professional to do the job, wait until you hire an amateur.
For more information about this topic, click search below!
 

Logo light pianostreet.com - the website for classical pianists, piano teachers, students and piano music enthusiasts.

Subscribe for unlimited access

Sign up

Follow us

Piano Street Digicert